Call (719) 240-4930 or (719) 240-4929

ZIP WALL ACCESSORIES

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Barrier Kit

Q
  • Two spring-loaded poles secure a dust barrier up to 10 or 12 feet high and 10 to 12 feet wide. Strong and lightweight stainless steel construction. Innovative non-skid, non-marking head and plate. Package contains two poles with parts (heads, plates, and GripDisk™ non-slip pads).
  • Quick & easy to set up — no ladders, no tape, no damage.
  • 10’ (2 PACK)
  • 12’ (6 PACK)
  • Residential use
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Mat Starter Kit

 

Q
Prevent tracking dust in and out of the work area! The adhesive surface captures dust on contact – simply peel away the top sheet to expose a new surface! The Starter Kit includes a reusable non-skid base and one pad of 30 disposable adhesive sheets. A4-pack refill is available.
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Steel Frame Magnetic Door™ Kit 3070

Q
Covers a standard 3’x7′ commercial steel frame door to keep dust contained. Installation is a snap with magnetic strips that attach the door panel to the steel frame. Powerful self-closing magnets
  • Flame retardant door panel features a clear plastic window and 10″×12.5″ clear pocket
  • Self-closing magnets are sewn-in
  • Can be used with positive or negative air
  • Reusable, durable, and easily handles high traffic

One 7’2″ × 3’4″ door panel, four 40″ magnetic side strips, and one 41.5″ magnetic header strip.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipDoor® Standard and Commercial Door Kits

Q
Standard Kit

Quickly cover a doorway to provide an airtight seal with this plastic zippered door. The door, made of 4 mil plastic sheeting, attaches to the doorframe with a special double-sided tape that protects the frame surface. Preinstalled heavy-duty zippers provide easy entry and exit. Flap hooks hold the door open for easy access.

The ZipDoor® Standard kit includes one zippered door, one roll of tape, and two flap hooks. It fits a standard door up to 3.5′ x 7′.

Commercial Kit

The ZipDoor® Standard kit includes one zippered door, one roll of tape, and two flap hooks. Fits a commercial door up to 4.5′ x 8′.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipFast™ Multi-pack Starter Pak

Q
The ZipFast™ multi-Pack is a perfect starter kit. It allows you to create a barrier up to 17.5 feet wide, which includes a 2.5 ft-wide door with hook and loop fastener tie-backs. The carry bag makes it easy to store the ZipFast™ barrier between jobs and always have it on hand.

Ready to use – no measuring or cutting

  • Greener and more cost-effective than plastic sheeting
  • Provides privacy on both sides of the barrier
  • Professional looking
  • Made of high-tech fabric with built-in heavy duty zippers
  • Machine washable
  • Includesthree 5′ × 12′ panels, one 2′ 6″ × 12′ panel, and a ZipWall® carry bag.

 

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Dust Barrier Poles

Q
Quick & easy to set up — no ladders, no tape, no damage with two spring-loaded poles to secure a dust barrier. Strong and lightweight stainless steel construction. Innovative non-skid, non-marking head and plate. Packages contain two poles with parts (heads, plates, and GripDisk™ non-slip pads).

Up to 10 feet high and 10 feet wide.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Foam Rail™ Tapeless Seal

Q
FoamRail™ tapeless seals work with all ZipWall® poles. The TClip™ connector snaps onto the ball joint of a ZipWall® pole to seal a dust barrier at the ceiling. Add side clamp™ wall mounts to seal at the wall, and floor adaptors to seal at the floor.
  • Seal a dust barrier without tape in seconds
  • Require no ladders and leave no damage
  • Aluminum construction with compressed foam
  • Reusable and cost-effective
  • Can be used with negative or positive air
  • Work with all ZipWall® poles
  • A great alternative for tape when tight sealing is required

Contents: Two 4 foot aluminum FoamRail™ tapeless seals with T-Clip™ attachments.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

MagStrip™ Dust Barrier Fastener

Q
Powerful magnetic strips easily attach to the steel grid of a drop-ceiling using a ZipWall® pole and the specially designed applicator.
  • Fast to set up and remove
  • Magnetic strips snap onto the steel grid
  • Applicator works with any ZipWall®pole
  • Reusable and professional
  • No ladders, no tape, no damage

Each package includes four 26″ magnetic strips and one applicator for use with a ZipWall® pole.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Dust Barrier PassThrough™

Q
  • Supports any duct hose up to 14″ in diameter, including vinyl, while maintaining the integrity of the barrier.  A nylon fabric sleeve seals around the hose with a quick cinch. When the hose is removed, the sleeve can be cinched closed to completely seal the opening.
  • a ZipWall containment barrier, the PassThrough™ provides an efficient way to use drying and air filtration equipment.
  • Works with all ZipWall®spring-loaded poles
  • Resealable once the duct is removed
  • Requires no tape
  • Reusable, neat and professional
  • One PassThrough™.pole and hose are not included.
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Steel Frame Magnetic Door™ Kit 3070

Q
Covers a standard 3’x7′ commercial steel frame door to keep dust contained. Magnetic strips quickly attach door panel to the steel frame. Flame retardant door panel features a clear plastic window and clear pocket for documents.

Includes one 7’2″ × 3’4″ door panel, four 40″ magnetic side strips, and one 41.5″ magnetic header strip. Covers a standard 3’x7′ commercial door and keep dust contained during interior construction or restoration projects. Pockets along the door panel keep magnetic strips secure.

  • Flame retardant door panel features a clear plastic window and 10″×12.5″ clear pocket
  • Self-closing magnets are sewn-in
  • Can be used with positive or negative air
  • Reusable, durable, and easily handles high traffic

Contents: One 7’2″ × 3’4″ door panel, four 40″ magnetic side strips, and one 41.5″ magnetic header strip.

CALL FOR PRICING

&nbsp

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

ZipWall® Heavy-Duty Zipper

Q
  • The 12-Pack includes twelve heavy-duty zippers, twelve flap hooks, and one ZipperKnife™. Packed in a convenient re-closable box.
  • Each ZipperKnife™ will make up to 100 cuts.
  • Effective at temperatures as low as 32 degrees F.
CALL FOR PRICING

 
Contents: Twelve zippers, twelve flap hooks, and one ZipperKnife™ sheeting cutter.

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix Quick Chamber System

Q
Create an effective drying chamber by sealing open thresholds and passageways.
  • Versatile adjustment — 27” out to 73”
  • Lightweight rigid aluminum parts
  • “L” feet positively lock plastic will not rotate or slip out of position
  • Spring clip retainers holds plastic to maintain a tight seal
  • Carrying case with dividers

One Extender bar, extending the range of any Quick Chamber to openings from 48” to 73”

CALL FOR PRICING