Call (719) 240-4930 or (719) 240-4929

WATER REMOVAL EQUIPMENT

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix 50 HZ Hydro-X Xtreme Xtractor

This industrial vacuum system is has a highly powerful suction for  high level water removal with a powerful, durable water removal and extraction system that is portable and easy to maneuver.

Q

FEATURES

Convenient and easy to operate and maintain, this unit is designed to extract water in a variety of damage conditions. Works on multiple surfaces including hardwood flooring, industrial carpet, and more.

  • The most effective and efficient extraction tool on the market today.
  • No other extractor today can pull as much water from the carpet and pad as the Hydro-X Xtreme Xtractor.
  • Can be connected with the Hydro-X Vacuum Pac, other portable extractors, or truck-mounts.
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix HydroX Vacuum Pac

The Phoenix Hydro-X Vacuum Pac outperforms the competition by its ability to apply all of its suction power at the source, pulling more water than any other restoration extraction tool on the market today.

Q

FEATURES

The Vacuum Pac, with its patented, portable design and high-end technology, has two powerful vacuum motors that can generate maximum suction. The portable Vacuum Pac can be hand carried anywhere in a structure. Truck mount units must stay outside the structure, and every foot of hose deducts 1 cfm of vacuum power. When compared to truck mount units, the Vac Pac can apply all of its suction power right at the source of the water, losing no cfm due to 24, 50 or 100 ft. of hose.

  • Portable – applies all of its suction power at the source
  • Rust and corrosion resistant stainless steel construction
  • Built to withstand daily use
  • Heavy duty electricals
  • One year warranty on parts and labor
  • Can be used separately from the Hydro-X Xtreme Xtractor
  • Full stainless steel chassis
  • Industrial vacuum and water pump
  • Optional port for other vacuum needs
  • Dual vac motors
CALL FOR PRICING