Call (719) 240-4930 or (719) 240-4929

POWER EQUIPMENT

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

LEX 10/4 SJTW Power Transfer Generator Cord, CCM Protected

Designed for use with portable generators with L14-30R. Manufactured to 10/4 AWG.

Q
  • Each conductor contains 104 strands of 30 gauge 100% pure copper
  • Heavy duty molded on 30A-125/250V (NEMA L14-30) twist lock plugs & connectors
  • Weather resistant, heavy duty SJTW 300V cold weather jacket works in temperatures down to -40°F
  • Color: Black
  • Lengths: 25ft & 50ft
  • UL Listed and cUL Approved for Canada
CALL FOR PRICING
Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

LEX 400 amp Pagoda Pagoda™ to Duplex Receptacle

Rating: 100 Amp, Three-phase (H,H,H,N,G), 4-pole, 5-wire, 120/208Y VAC, 60 Hz

Q
  • Environmental Rating: NEMA Type 1 (Indoor Use)
  • Input:  (1) set of (5) 16 Series, 400 Amp, single pole, single wire, 600 VAC, BRBWG color-coded, cam-type inlets, panel mount
  • Feed Thru: None
  • Main Breaker: None
  • Output: (15) NEMA 5-20 (Edison), 20 Amp, 2-pole, 3-wire, 125 VAC, straight blade duplex receptacles, panel mount
  • Overcurrent Protection: (15) 20 Amp, 125 VAC, single-pole, hydraulic magnetic, branch-rated circuit breakers
  • Enclosure Type: Pagoda™
  • Dimensions: 14.25″L x 14.25″W x 14.15″H
  • Weight: 32.0 lbs
  • Agency Approval: cULus Listed
CALL FOR PRICING
Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

LEX 100A 5-Wire Banded Cam-Type Feeder Extension

Rating: 100 Amp, 600 VAC, male plug: (5) 16 Series Cam-type.

Q
  • Single Pole; Black, Red, Blue, White, Green
  • Cable/Cord: #2 SC, Black, Banded
  • Length: 50′ Stock Length
  • Female Connector: (5) 16 Series Cam-type, Single Pole; Black, Red, Blue, White, Green
  • Agency Approval: cULus Listed
CALL FOR PRICING
Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

LEX 400 Amp Power Station with Casters to California Style Locking Receptacles, Weather Resistant

Q
  • Rating: 400 Amp, Three-phase (H,H,H,N,G), 4-pole, 5-wire, 120/208Y VAC, 60 Hz
  • Environmental Rating: NEMA Type 3R (Weather Resistant)
  • Input: (1) set of (5) 16 Series, 400 Amp, single pole, single wire, 600 VAC, BRBWG color-coded, cover doors, cam-type inlets, panel mount
  • Feed Thru: Yes
  • Output: (10) California Style CS63, 50 Amp, 3-pole, 4-wire, 125/250 VAC, locking receptacle, cover doors, panel mount
  • Overcurrent Protection: (10) 50 Amp, 120/240 VAC, double-pole, hydraulic magnetic, branch-rated circuit breakers
  • Enclosure Type: Power Station™ with Casters
  • Dimensions: 22.00″L x 17.00″W x 18.00″H
  • Weight: 65.0lbs
  •  Approval: cULus Listed
CALL FOR PRICING
Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

CEP Power Cord

Q

50 Ft., 50 AMP, flexible, abrasion-resistant. Reliable performance to -40 degrees C, UL listed file number E-48380.

CALL FOR PRICING
Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

CEP Power Distribution Box

Q

Temporary power distribution center. 50 Amp 125/250 Volt UL listed for outdoor use.

CALL FOR PRICING