Call (719) 240-4930 or (719) 240-4929

DESICCANT DEHUMIDIFIERS

Q

Phoenix D850 Portable Desiccant Dehumidifier

The Phoenix D850 provides the perfect blend of portability, versatility, and performance the restoration industry has been seeking in a medium-capacity desiccant dehumidifier.

Phoenix D850 Portable Desiccant Dehumidifier

The Phoenix D850 provides the perfect blend of portability, versatility, and performance the restoration industry has been seeking in a medium-capacity desiccant dehumidifier.

Q

This model operates horizontally or vertically and is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.

FEATURES

  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers and is sized for 2 ACH (class 2) for up to 25,500 cu ft and up to 3 ACH (class 3 & 4) on 17,000 cu ft
  • 850 CFM of Process Air Flow
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • 370 PPD @ AHAM Water Removal
  • Ultra-low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Stainless Steel, lightweight
  • Uses Max Grains when tenting or drying low evaporation materials
CALL FOR PRICING

 

Q

Phoenix D385 Portable Desiccant Dehumidifier

The Phoenix D385 provides the perfect combination of features and performance for the restoration professionals. The D385’s four-hole design allows the restoration contractor to set-up for effective positive, neutral or negative pressure operation.

Q

FEATURES

  • The portable design is perfect for operating vertically or horizontally
  • Process airflow 385 cfm
  • Reactivation airflow 75 cfm
  • 130 pints water removal per day at AHAM
  • Ultra-low grains
  • Two 23’ power cords: Each 115 Volt/60 Hz; 12 Amps per cord; 24 Amps/115 Volts total
  • Unlimited ducting possibilities
  • Legendary stainless construction
CALL FOR PRICING

 

Q

Phoenix 4 800 CFM Propane Desiccant Dehumidifier

The robust construction is designed to withstand the rigorous conditions of water damage restoration, shipyards, off- and on-shore petrochemical facilities, manufacturing plants, and more.

Q

The 4800 is constructed primarily of light-weight aluminum for maximum strength and corrosion resistance. The Phoenix 4800 removes over 3,000 pints of water per day at AHAM and has an operating range of -10ºF to 140ºF. This unit comes equipped with a reactivation temperature sensor that controls the amount of heat going into the rotor, so that the desiccant is always operating under optimum conditions.

FEATURES

  • 3032 pints/day AHAM
  • 4800 CFM process airflow
  • Dries in temperatures to 140ºF and reaches dew points as low as -40ºF
  • 480 volt 3-phase
  • 106 amps
  • Available with or without the frame
  • 48” x 120” x 66” weighs 1550 Lbs. (desiccant without frame)
  • 48” x 120” x 74” (desiccant with frame)
CALL FOR PRICING

 

Q

Stulz 700 cfm Portable Desiccant

Stulz 700 cfm is portable, self-contained, and designed for maneuverability in small spaces like building elevators and tight corridors. This makes the DRY-700 the logical choice for structural drying.

 

Q

Engineered to operate under severe operating conditions, the DRY-700 uses desiccant technology to remove water vapor directly from the air. Removing water from the air reduces the air vapor pressure, which improves evaporation.

FEATURES

  • Rugged all aluminum cabinet construction
  • Advanced silica gel desiccant rotor
  • Single point power connection – 12′ self-storing power cord
  • Solid state controls
  • Proportional controlled electric reactivation of desiccant rotor
  • Wheel mounted (skid mounted available for permanent installation)
  • Beaded air connections; accommodates
  • High External Static Pressure
  • Low maintenance-easy access to all internal components
  • Made in the USA
CALL FOR PRICING