Call (719) 240-4930 or (719) 240-4929

DEHUMIDIFIERS

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix 250 Max Dehumidifier

Phoenix has added a new heavy-duty condensate pump and a new rugged float switch designed specifically for restoration environments.

Q

The unit features an outlet grill that is configured to accept a variety of thermohygrometer probes (e.g. HM-34 and 40, Humiport, LM-8000, etc.) for taking accurate psychrometric readings. For added convenience, the power cord and condensate hose store inside the hinged lid, while the stackable design helps maximize your storage capacity. Like all Phoenix dehumidifiers, the R250 also features superior filtration, and multiple ducting options.

FEATURES

  • Improved water removal 145 pints/day AHAM (80ºF, 60%) 31 gals/day maximum
  • Improved grain depression the driest air from an LGR
  • Multiple air filter options standard 65% MERV-11, or 57% MERV-8
  • Multiple ducting options 12” intake, 10” lay flat supply
  • Less than 8.2 amps
  • Removes the most pints of water per kilowatt-hour
  • Stainless steel cabinet
  • Internal pump with 30 feet of hose
  • Five-year warranty on the sealed refrigeration system
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix R175 LGR Dehumidifier

The Phoenix R175 combines our Proven Performance into a compact, state of the art, roto-mold design. The R175 reflects all the ingenuity and engineering expertise that is expected in Phoenix name-brand equipment.

Q

Efficient design results in the R175 removing 30% more water (92 pints at AHAM) than competitive LGR units of similar size, while drawing only 6.3 amps of power. The Phoenix reputation for performance is continued in the R175’s excellent grain depression and operating range.

The sturdy telescoping handle provides sure control and retracts for storage. The recessed 12-inch wheels, compact design and balanced weight distribution make the R175 the most maneuverable dehumidifier in the restoration industry.

The rugged roto-mold housing resists dents and dings and the granite pigments hide scuffs and scratches. The body also features chamfered corners to prevent damage to walls and woodwork while maneuvering on the job-site. Phoenix attention to detail and fore-thought are evident in the R175’s ability to “nest” one upon another, or securely be “layered” with plywood. An area to accept a company label or identification is located below the R175 emblem. Notched surfaces for tie-down straps and multiple lift points were also included.

CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Phoenix Dry Max BLE LGR Dehumidifier

The ultra-compact design of the Phoenix Dry Max makes it the smallest “Large Category” LGR on the market today. This unit removes 80ppd@AHAM, uses only 5.7 amps, and weighs a mere 63lbs.

Q

FEATURES

  • Industry leading graphical control panel
  • Superior stacking
  • Easy access for service
  • On-board storage for 25’ power cord and
  • 33’ condensate hose
  • 80 PPD @ AHAM
  • Optional Bluetooth Upgrade Kit for existing DryMAX units
  • Built-in Bluetooth technology with data logging and instant readings
  • Free Phoenix DryLINK mobile app, compatible with iOS and Android
  • Available in Blue or Red
  • 3-year warranty on new style condensate pump
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

XPower XD-85LH Commercial Dehumidifier

The LGR Commercial Dehumidifier with handle & wheels. 6.7amps, 85 pints water removal per day (AHAM -80 degrees F/ 60% Relative Humidity)

Q

FEATURES

  • Water removal capacity: 85 pints/day at AHAM (80°F, 60% RH)
  • Water removal capacity: 145 pints/day at Saturation (90°F, 90% RH)
  • LGR Performance with operating range between 33°- 105°F(0.6°- 40.6°C)
  • Advanced recessed digital control panel
  • 180 CFM maximum airflow capacity with low 6.7A power draw
  • 25 ft. power cord and 40 ft. long drainage hose
  • 67 lbs. unit weight
  • Durable and rugged roto-mold housing with handle and wheels
  • ETL/CETL safety certified
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q
Q

Xpower XD-125 Commercial Dehumidifier

The XPower has a built-in water pump with water-removal capacity of 76 pints per day at AHM (80°F, 60& RH) and 125 pints per day (90°F, 90% RH).

Q

FEATURES

  • A built-in water pump with drainage hose automatically purges when full- eliminating the task of monitoring collection tank levels
  • Uses standard refrigerant (R410A); with operation range between 33° – 100°F (1° – 38°C)
  • High efficiency rotary compressor with advanced recessed digital display control panel
  • Durable and rugged roto-mold housing with shock absorbing semi-pneumatic tires
  • Low 7.3 Amps power draw with 235 CFM maximum airflow capacity
  • Programmable for a relative humidity level between 90% and 26%
  • 25 Ft. power cord and 20 Ft. long drain hose
  • ETL/CETL safety certified and meets OSHA safety requirements
  • Dimensions: 22x21x34  Weight: 90 lbs
CALL FOR PRICING

 

Q

Description

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet
  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods.
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers

and is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  • 850 CFM of Process Air Flow
  • 370 PPD @ AHAM Water Removal
  • Ultra Low Grains or Max Water Removal
  • True Four Hole Desiccant
  • Operates Vertically and Horizontally
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • Small Size and Weight

•              Legendary Stainless Construction

Q